Sticker Fab V1 and V2 Headlight / Front Sidemarker Overlays Subaru WRX 2022-2025

Description

2022-2024 WRX Headlight / Front Sidemarker Overlays

Sidemarker overlays and eyebrows are pretty popular aesthetic mods for a vehicle. These knock out some of the bright orange in the headlights and wraps around the top of your headlight to visually change it up.

Design options:

• V1 – partial cover (only covers side)
• V2 – covers side and top
• V3 – partial cover (only covers side; the V3 is smaller than V1, and is appropriate for Limited headlights. V3 still looks great on normal headlights)

NOTE: On Limited models the appearance will look different due to their internal design.

Available colors:

Dark Smoke – Standard dark smoke material. Made in Germany.

Light Smoke – Standard light smoke material. Made in Germany.

Black – Supercast film that will only let a small amount of light through when backlit.

INSTRUCTIONS

Desired temperature for work environment: 70-85 degrees,

Clean the application and surrounding areas prior to applying. We recommend the following items for installation:

• Microfiber
• Detailing Spray or glass cleaner
• Soapy Water (StickerFab Application Fluid recommended)
• Squeegee (soft edge)
• Heat Gun or Hair Dryer

Make sure there is no wax on the lens. You can wet the back of the vinyl with a few drops of dish soap in a cup of water. This allows you to slide the vinyl around into the right position. Once you have found that position, use your fingers to push out the soapy water. Allow to dry. LOW heat can be used to dry out the vinyl quicker.